↓
 

Mid-Continent Railway Museum

North Freedom, Wis.

Mid-Continent Railway Museum logo banner with images of train cars and people.
  • Home
    • Home Page
    • News
    • Join Our Email List
    • Media
  • Plan Your Visit
    • Buy Tickets
    • Train Ride/Museum Info
    • Special Events
      • Root Beer Float Flyer
      • Vintage Rail Car Tours
      • Autumn Color™ Weekend
      • Harvest Flyer
      • Pumpkin Special™
      • Halloween Flyer
      • Santa Express™/Holiday Flyer
    • Cancellation Policy
  • Restorations
    • Major Projects
    • Steam Status
      • Overview
      • C&NW #1385 Status Updates
      • Western Coal & Coke #1 Status Updates
      • Dardanelle & Russellville #9 Status Updates
    • Car Shop
      • General Updates
      • DSS&A Sleeper DULUTH
      • EJ&S #2
      • Badger #2
      • Copper Range #25
      • MLS&W #63
      • Copper Range #60
  • Equipment Roster
    • Equipment Roster Home
    • Steam Locomotives
    • Diesel/Other Locomotives
    • Wooden Passenger Cars
    • Steel Passenger Cars
    • Wooden Freight Cars
    • Steel Freight Cars
    • Cabooses
    • Service Equipment
    • Former Collection Items
  • Resources
    • Online Archives Home
    • Wooden Car Builders
    • MCRM Newsletters
    • Gazette Archive
    • Audio Archive
    • Video Archive
    • Wallpaper
    • Kids Page
      • Kids Page
      • What Makes A Diesel Locomotive Work?
      • What Makes A Steam Locomotive Work?
  • About Us
    • Contact Us
    • About Mid-Continent
    • Board of Directors
    • Department Leaders
    • Our Staff
    • Become a Member
    • Volunteer
    • Employment
    • Tour of Grounds
    • Local History
    • Mid-Continent Timeline
    • Policies
      • Privacy Policy
      • Non-Discrimination Policy
  • Donate

Category Archives: Mechanical Department

Help Keep #1385’s Legacy On Track!

Mid-Continent Railway Museum Posted on February 12, 2026 by RebeccaApril 8, 2026

Thanks to your continued support, we are now up to $86,411 out of our $300,000 goal as of 4/8/26. That milestone is no small feat and is truly a testament to the passion of this community! We are deeply grateful to everyone who has donated, shared their personal stories connected to the engine, or expressed excitement about seeing this historic locomotive operate again later this year.

Even though the finish line is in sight, we must reach our full $300,000 goal in order to bring Chicago and North Western #1385 back into service in 2026. If we’re not able to raise these funds, progress will unfortunately have to slow down, meaning we won’t be able to operate this year.

This restoration has already delivered an unforgettable moment. As some of you know, on December 5th, 2025, #1385’s whistle echoed across North Freedom, Wisconsin for the first time in nearly 30 years. Watching her steam beneath the water tower once again was nothing short of magical. A true glimpse of history re-awakening.

We are closer than ever to completing this restoration and sharing #1385 with everyone who loves her. This project has always been about honoring memories, the love of the machinery, and ensuring that future generations can experience the power, sound, and spirit of this remarkable, 1907 built locomotive.

We humbly ask you to be part of the final push. Your donation will help complete the remaining work needed to return #1385 to operation in 2026. Below, you’ll find details on what your support will fund, along with a few ways to contribute. As always, thank you for your continued support and your consideration. Please stay tuned next week for more #1385 updates!

What your support will help finish:

• Large items:
Purchase and install boiler insulation and fabricate new boiler jacketing
Build patterns and have new arch brick manufactured for inside firebox
Repair drawbar, buffer, and safety chains
Manufacture new pistons, piston rings, and rod packing
Install pistons, piston heads, and packing
Manufacture new valve gear blades
Install valve gear and blades
Manufacture new piston valve rings
Set valve gear timing of engine
Support the cost of fuel, lubricants, and supplies for break-in runs
Support labor and materials to apply final paint and lettering to the locomotive

• Medium and small items
Finish manufacturing and installation of front-end arrangement
Manufacture and install airtight casings around branch pipes
Machining, fitting and installation of crossheads, crosshead guides and crosshead slippers
Finish fit-up and installation of air and steam piping on engine and tender
Finish electrical wiring
Repair to bell, yoke, and ringer
Purchase, manufacture and install numerous fit and finish items
Support contract work for specialized jobs

• Donate online using the button below


• Donate by phone through our museum’s office: 608-522-4261


• Mail your donation: Mid-Continent Railway Museum, P.O. Box 358, North Freedom, WI 53951 (Write “#1385 Fund” in the memo line.)

Donate Online Here
Posted in C&NW #1385 Status Updates, Critical Notices, Mechanical Department, News

Help Us Restore Two Icons of Rail History | Two Separate $10,000 Matching Fund Challenges!

Mid-Continent Railway Museum Posted on August 29, 2025 by RebeccaAugust 29, 2025

We are thrilled to announce two separate $10,000 matching fund challenges to support the preservation and restoration of two historically significant rail cars in our collection. Thanks to two generous donors, every dollar you give will be matched dollar-for-dollar, up to $10,000 for these two projects!

🔹 Montana Western #31 (AKA Great Northern #2313): The funds will be used to rebuild the radiator in this oldest surviving EMC gas-electric motorcar. The Montana Western #31 was the 30th unit of its kind and represented the cutting edge of technology at a time when railroads were seeking alternatives to steam service on branch lines.

🔹 Duluth South Shore and Atlantic DULUTH Sleeper Car: This is an extremely rare example of a wooden sleeper car. The matching fund drive is targeted to provide the needed funds to replicate the original Men’s Smoking Room in the DULUTH. The Men’s Smoking Room had two sinks, a saloon (toilet) and a long sofa. This room was the area of the car where men could gather and have a smoke or wash up during their overnight trip along the Duluth South Shore & Atlantic route between Sault Ste. Marie and Duluth, MN. Drawings have already been made and with the $10,000 challenge donation and matching funds, we will be able to construct new mahogany veneer walls (with marquetry) for the smoking room.

The Men’s Smoking Room floorplan in the DULUTH.

The interior of the Men’s Smoking Room as it stands currently.

Help us keep these pieces of history alive! Donate to one or both projects today using the buttons below.

Donate to the Montana Western #31 Matching Fund Challenge
Donate to the Duluth South Shore and Atlantic DULUTH Sleeper Car Matching Fund Challenge
Posted in Car Shop, Car Shop General Updates, DSS&A Sleeper DULUTH, Mechanical Department, Montana Western #31

Mechanical Department Volunteer Work Session (May 4th-5th)

Mid-Continent Railway Museum Posted on April 24, 2024 by RebeccaApril 24, 2024

The Mechanical Department will be holding a work session the weekend of May 4 and 5 in conjunction with the Spring Fling event.

The goal for this work session is to disassemble, inspect, clean and install the brake cylinder of the DLW 557, perform the single car test on DLW 425, DLW 557 and DM&IR C-74.

If you are available to help with this work session, please contact the office via inquiries@midcontinent.org or 608-522-4261.

Mechanical Department Update (April 13-14, 2024)

Mid-Continent Railway Museum Posted on April 16, 2024 by RebeccaApril 17, 2024

We had a great work session this past weekend!   

On Saturday, the Delaware, Lackawanna & Western cars #425 and #557 as well as the Duluth, Missabe & Iron Range caboose C-74 were jacked up to place lubricating discs in the bolster bowls – this is where the car body meets the trucks. TJ, Al J, Grant H, Ross S, Fred V, Nick V, Pete D and Colton T helped out with this task.  

A new 3 phase electric panel has been installed in Mid-Continent’s Machine Shop. Tom H and Bob D mounted the new 3 phase panel to accept the new feed from the Engine House panel. After the contractor ran the new feed, Tom and Bob made the connections to the circuits in the machine shop. As part of this work, a single-phase panel was installed. 

Dave W was working on throughout the weekend to create fixtures to assist with the eventual installation of tires on the Western Coal & Coke #1 steam locomotive’s front truck wheels.   

On Sunday, Greg W, Fred V, Adam C and Ed R performed an undercarriage inspection on MCRY #1256, Mid-Continent’s ex-Army locomotive that serves as the museum’s primary locomotive for operating demonstration train rides. The work included checking the traction motor support bearing sumps and wicks, traction motor brushes and checking for any other defects under the locomotive while it was over the pit.   

A crew led by Pete D of Grant H, Colton T, and Fred V disassembled the brake cylinder on DL&W #425 to clean and inspect the cylinder bore and piston packing cup.   

Tom H and Bob D took advantage of the #425 being in the shop. They worked on removing old wiring and damaged electrical conduit that ran from the electrical cabinet on the A-end of the car to the baggage end platform on the B-end of the car. They will be installing new pieces of conduit where needed in preparation for installation of new wire. 

The DL&W #557 coach car still needs to have its cylinder disassembled and inspected and a single car air brake test still needs to be performed on the #425, #557 and C-74 before the season begins.   

The DL&W #595 and #563 still need to be jacked up to have lubricating discs placed in the bolster bowls, have the brake cylinders disassembled/cleaned/inspected and a single car air brake test performed before the operating season begins.   

There will be work happening during the museum’s Spring Fling weekend, May 4 and 5. There may also be a work session before then. If you are interested in joining the ranks of Mechanical Department volunteers, please contact our office at inquiries@midcontinent.org or RSVP for the Spring Fling here: https://form.jotform.com/240655916920157  

Photos courtesy of Colton T.

Pete D and Grant H disassembling the brake rigging in preparation of disassembling the brake cylinder.
The #425 is being lifted with the jacks.  Al J is watching a level placed on the platform and is directing people at each jack to keep the car level as it is raised.
DL&W #425 The car has been lowered back onto the trucks.
Brackets for mounting the conduit to the car are being removed.  This will assist with the removal of the old wiring.
Light shines through the windows of the Engine House, highlighting C&NW #1385’s tender in the distance.
MCRY #1256 under the spotlight of sun rays in the Engine House.
Posted in Mechanical Department, Western Coal & Coke #1 Status Updates
QUICK LINKS
PLAN YOUR VISIT
BUY TICKETS
DONATE
JOIN OUR EMAIL LIST
VIEW WEBCAMS

Contact Us

Mid-Continent Railway Museum
P.O. Box 358
E8948 Museum Road
North Freedom, WI 53951
Office Phone: 608-522-4261
or 800-930-1385
Office Hours: Tuesday-Sunday
9:30am-5:00pm
E-mail: inquiries@midcontinent.org

Recent News

  • Help Keep #1385’s Legacy On Track – Update
  • Dardanelle & Russellville #9 – March 21, 2026, Work Session Update
  • Help Keep #1385’s Legacy On Track!
  • Montana Western #31 and DULUTH Sleeper Car $10,000 Donation Challenges MATCHED
  • 2025 DULUTH Progress Report
©2026 - Mid-Continent Railway Museum - Weaver Xtreme Theme Privacy Policy
↑