↓
 

Mid-Continent Railway Museum

North Freedom, Wis.

Text: Mid-Continent Railway Museum. A historical and educational experience. Images of railway cars, people, and Mid-Continent logo.
  • Home
    • Home Page
    • News
    • Join Our Email List
    • Media
  • Plan Your Visit
    • Buy Tickets
    • Train Ride/Museum Info
    • Special Events
      • Root Beer Float Flyer
      • Vintage Rail Car Tours
      • Autumn Color™ Weekend
      • Harvest Flyer
      • Pumpkin Special™
      • Halloween Flyer
      • Santa Express™/Holiday Flyer
    • Cancellation Policy
  • Restorations
    • Major Projects
    • Steam Status
      • Overview
      • C&NW #1385 Status Updates
      • Western Coal & Coke #1 Status Updates
      • Dardanelle & Russellville #9 Status Updates
    • Car Shop
      • General Updates
      • DSS&A Sleeper DULUTH
      • EJ&S #2
      • Badger #2
      • Copper Range #25
      • MLS&W #63
      • Copper Range #60
  • Equipment Roster
    • Equipment Roster Home
    • Steam Locomotives
    • Diesel/Other Locomotives
    • Wooden Passenger Cars
    • Steel Passenger Cars
    • Wooden Freight Cars
    • Steel Freight Cars
    • Cabooses
    • Service Equipment
    • Former Collection Items
  • Resources
    • Online Archives Home
    • Wooden Car Builders
    • MCRM Newsletters
    • Gazette Archive
    • Audio Archive
    • Video Archive
    • Wallpaper
    • Kids Page
      • Kids Page
      • What Makes A Diesel Locomotive Work?
      • What Makes A Steam Locomotive Work?
  • About Us
    • Contact Us
    • About Mid-Continent
    • Board of Directors
    • Department Leaders
    • Our Staff
    • Become a Member
    • Volunteer
    • Employment
    • Tour of Grounds
    • Local History
    • Mid-Continent Timeline
    • Policies
      • Privacy Policy
      • Non-Discrimination Policy
  • Donate

Category Archives: EJ&S #2

Post navigation

← Older posts

“All Hands on Deck” | Restoration Department Update | June 18-22, 2025

Mid-Continent Railway Museum Posted on August 6, 2025 by RebeccaAugust 7, 2025

The 5-day long “All Hands on Deck” session held on June 18th-22nd by the MCRM Restoration Department was a great success. The very successful and productive “All Hands on Deck” Session had a total of 32 volunteers participating in the event, with an average of 20 volunteers per day. In total the volunteers put in over 800 hours of work during this session. The volunteers really did an outstanding job and performed an immense amount of work in a matter of a few days.

Anyone visiting the MCRM Car Shop after this event will notice a significant difference in the appearance of the cars that were worked on. The progress made during this session exceeded the expectations. The progress made was achieved due to the support, commitment and hard work of the volunteers. Progress made during the 5-day All Hands on Deck Session is summarized below. Note that several of the photos capture the status of the projects before and after the All Hands on Deck session.

East Jordan & Southern Combine #2:
 The volunteer crew of Pete, Jeff Hu., Jeff A., Jeff Ha and Dean S. assembled and installed the Buntin seat frames, seat back and seat bottoms for the seats in the passenger section. This included boring the holes in the truss plank for the foot rests and installing the arm rests on the aisle castings. The crew also installed the second overhead oil lamp in the passenger section as well as the oil bracket lamp adjacent to the saloon. With work wrapping up in the passenger section additional work was performed in the baggage compartment.

BEFORE: The EJ&S #2 as Dean S., Jeff Hu and Jeff A. work on installing brackets on the ends of the seat backs.
Pete, Jeff A. and Jeff Hu installing the seat brackets on the east side of the car.
The new seats and cushions installed on the east side of the car.
AFTER: The EJ&S after three days of work to install the new seats. The newly installed seats on the left are covered with sheets.

Duluth South Shore & Atlantic Sleeping car DULUTH: The volunteer crew of Karl, Bob B., Ron, John, Dean V., Nate, Andrew, Tom, Jack, Jerry F. and Bill worked on the DULUTH during the AHOD session. During the session we took delivery of six new berth tables, six folding window screen frames, the sleeping compartment window panels and trim pieces for the smoking room. Work performed included installing trim pieces, headliner battens and a window bottom rail in the smoking room. In the sleeping compartment the new window post panels were trimmed, fit and installed along with the berth partition overlay pieces. The accomplishments in the sleeping compartment are significant as they will allow us to move on to installing the heating pipes and lower berths.

On the exterior of the car over 15 feet of the car received new car siding on the area below the windowsill. Another significant accomplishment was the installation of the new 8-piece windowsill for the east side. Each piece of the windowsill was doweled and screwed together to make for a one-piece sill 65 feet in length. Once assembled the windowsill was lifted into place with the help of ten volunteers evenly spread out across the length of the sill. Once in place the windowsill was screwed in place and the screw holes were plugged.

BEFORE: The sleeping compartment prior to the AHOD.
Part of the crew in the DULUTH. Dean V., Ron, Steve, Bob and Karl.
Ron in the process of install one of the berth partitions.
AFTER: The sleeping compartment after the AHOD.
Karl and John installing new lower siding on the DULUTH.
Volunteers in the process of installing the one-piece windowsill into place on the DULUTH.

Soo Line Caboose #99085: The volunteer crew of Richard P., Larry S., Bob R., David P., Dean S., Dean V., Jeff Hu., Altha, Jack, Jerry F., Gregg, Jane and Bill worked on the caboose during the AHOD session. Work performed included installing the new car siding on the east side of the car and framing out all four of the windows on the car. On the west side of the car new siding was installed around SW window and the bottom six inches of a number of boards were cut off and replaced. Epoxy repairs were made as needed on the car sides and the end beams. The entire car body was sanded, and all bare wood was primed. With the exception of a few areas awaiting further repairs, the entire car received two coats of the caboose red.

The new window frames for the car body and cupola were primed and given two coats of finish color. New wood roof drip edge pieces were made and are waiting to be installed along with the new rubber roof.

BEFORE: Jack and Jerry installing the new car siding on the east side of the caboose.
Work in process on the west side of the caboose.
AFTER: The caboose after five days of work.


Chicago & Illinois Midland Business Car #90: The volunteer crew of Steve, Dean V. and Jerry M. worked on the C&IM #90 business car. Work continued to route and install new wiring for the light fixtures in the south end of the car. The light in the toilet room has been energized and shortly power to the south entranceway and rear vestibule will be completed. In the south stateroom good progress was made with replicating the wardrobe. Final fitting of the door to the door frame was performed and the material for the wardrobe side and bottom were cut to size. All pieces of the wardrobe were sanded and the interior surfaces were sealed and stained.

Steve working on the wiring inside the C&IM #90.
Jerry M. and Dean V. staining the side panel for the wardrobe in the C&IM #90.

Rock Island Combine #1094: Fred B. And David M. braved the sun and heat to work on needle scaling the east side of the car. The process has them getting down to bare metal and removing all of the rust. Good progress was made as over 60% of the east side of the car has been needle scaled, wire brushed and primed.

Fred and Dave M. working on the CR&IP #1094.

Lake Superior & Ishpeming coach #64: Bob and Larry worked inside the #64 coach. Two new end doors were received as well as a new panel for the smoking room wall. The wood panel for the smoking room was installed while the end doors wait to be fitted to the car. Inside the car stripping and sanding the car continued on the south end of the car.

The new middle panel in LS&I #64 smoking room.
The new oak end doors for the LS&I #64.

“I’d like to thank all of the amazing volunteers who put in a tremendous amount of work during the past 5 days! Your collective efforts were amazing and a real morale booster to the restoration efforts at Mid-Continent. I’d also like to extend a special thanks to the volunteers that prepared all of the meals for the entire crew during the session.” – Bill, Restoration Dept. Manager

Some of the AHOD volunteers that were on hand during the session.
Steve serving up lunch time for the AHOD volunteers.
Posted in Car Shop, Car Shop General Updates, DSS&A Sleeper DULUTH, EJ&S #2, LS&I #64, News

June 2024 Restoration Work Sessions and All Hands on Deck Announcement

Mid-Continent Railway Museum Posted on May 27, 2024 by RebeccaMay 27, 2024
Group photo of some of the volunteers from the
“ALL HANDS ON DECK” session, 2023.

Summer is a busy time at Mid-Continent, as well as in the Restoration Department. Throughout the month of June, volunteers will have several opportunities to take part in helping Mid-Continent to preserve and restore equipment in the Car Shop.

Following is a summary of the dates volunteer work sessions will be taking place in the Car Shop:

 June 1st and 2nd: This session has been added as a result of the MCRM Summer Shindig being held (starts 4 pm on Saturday). Volunteers are needed to assist with the restoration work on the LS&I #64 coach, the DULUTH sleeping car and the EJ&S #2 combine.

June 8th, 9th and 10th: This session is one of our pre-scheduled volunteer work sessions. Pete B. will need volunteers to assist him with the EJ&S #2 project (on June 9th and 10th) and other work will also be taking place in the Car Shop during the three-day session.

June 26th to the 30th: This is a specially planned session to deliver a lot of results in a short period of time. To date (20) volunteers have signed up to help out during this session known as “ALL HANDS ON DECK”. We are still looking for more volunteers for this session so we can make significant progress that would otherwise take several months to accomplish. The primary projects for this session are the LS&I #64 (fill, sand and priming), the DULUTH (install siding and ceiling work), the EJ&S #2 (interior restoration) and the Rock Island #1094 (interior painting).  After a day of work, we’ll be providing meals and have planned after hour activities, including a pizza train ride at MCRM and a train ride/tour at the Riverside & Great Northern RR.

Any and all volunteers are welcome to participate in any or all of these sessions. If you’d like to volunteer for the All Hands on Deck session you must sign up in advance by contacting the MCRM Office at 608-522-4261 or via email at inquiries@midcontinent.org. You can help out on one or multiple days during the session, but please RSVP so we can appropriately plan the work and the meals.

Come join us and give us a hand! With everyone pulling together we’ll make some great progress in the Restoration Department.

Posted in Car Shop, Car Shop General Updates, DSS&A Sleeper DULUTH, EJ&S #2, LS&I #64

Restoration Department Update

Mid-Continent Railway Museum Posted on April 16, 2024 by RebeccaApril 16, 2024

The MCRM Restoration Department recently completed a three-day volunteer work session that was held on April 10th-12th. We had a good size crew given that it was held during the week. The volunteers that helped out for this session were Jack, Jerry F, Jerry M., Dean, Karl, Bob R., Richard P., Pete, Larry S., Owen, Tom B., Steve and Bill B. Thanks to this crew we got a lot of work performed and completed.

Following is a brief summary of the progress made during the session:

LS&I #64:

Work continued on cutting and fitting new wood for the exterior of the car. Karl trimmed up the new center window stops and installed them on the car. Bob R. primed all of the new battens for the windows. Jack and Jerry were working on cutting, fitting and installing new windowsills. Two windowsills remain to be cut and fit. They also installed one set of the new battens for the arched windows and sash. During the next session, work will continue on the windowsills and installing more of the window battens.

Bob priming the new battens.
Karl installing the center window stops.
Jack sanding the battens.
Jerry F. fitting one of the curved battens.
One window with all of the trim installed.

C&IM #90:

Jerry and Dean continued to install trim pieces and mahogany plywood in the north stateroom. The woodwork in the clerestory area is complete as well as the north and south walls in the north stateroom. Once additional mahogany plywood is purchased the east and west wall will be worked on. In the south stateroom, Steve roughed in the new wiring for the lighting and outlets for the room.

Jerry M and Dean installing trim pieces in the C&IM 90 south state room.

EJ&S #2:

Work continued in the passenger section of the car. Larry S. sanded the recently varnished woodwork while Owen worked on painting pieces of the clerestory trim (two colors). Owen and Bob teamed up to apply two coats of varnish on pieces of walnut trim during the session. Pete and Larry worked on cutting and planning pieces of poplar that will be used for making the seat back frames for the car. Plans call for moving the EJ&S #2 to the north end of the car shop so the car can be accessed easier for painting the exterior of the car. This move is scheduled to take place on April 20th.

Owen painting the trim pieces.
Bob varnishing the walnut trim pieces.

DULUTH:

Karl and Bill B worked in the DULUTH smoking room. They cut new headliner panels for the east and west sides as the old pieces were water damaged. Karl also started to remove the remnants of the partition that was embedded in the west wall where the swinging door was mounted.

Karl working in the DULUTH smoking room.

C&NW #1099:

Richard continued working on restoring and rebuilding the underframe of the narrow gauge combine. His work this year includes installing two new side sills, two new end body beams, two new body bolsters, one new intermediate sill and an all-new subfloor. During the session Richard and Larry S. worked on squaring up the frame in preparation to securing the flooring and side walls to the frame.

The latest progress on the #1099.

MISCELLANEOUS:

Bob installed the new springs on the National vestibule traps on the north end of the Badger #2 Fish car. The springs are part of a system that help lift the traps up, when opening, as well as prevents the traps from free falling when closing.

Larry T. is continuing to strip the old finish off the woodwork inside the GN A-22 “Hill” car. Larry is presently working in the state room and has also been working in the garage end of the car. He has been making good progress and he has been uncovering some beautiful mahogany along the way.

Newly installed spring on the Fish car trap.
Work progressing inside the garage end of the A-22 “Hill” car.

Upcoming work sessions include one on April 26, 27 and May 3, 4 and 5. The May 3-5 session is in conjunction with the “Spring Fling” event on May 4th. We’d really like to have a good turnout for the Spring Fling weekend as we have a number of projects that we need help with. You can register for the Spring Fling here: https://form.jotform.com/240655916920157

If you would like to help out in our restoration department, please reach out to the Mid-Continent office at 608-522-4261 or email inquiries@midcontinent.org.

Posted in Car Shop, Car Shop General Updates, DSS&A Sleeper DULUTH, EJ&S #2, LS&I #64

Restoration Progress in 2022 and 2023 for EJ&S No. 2

Mid-Continent Railway Museum Posted on October 16, 2023 by RebeccaOctober 17, 2023

Written by Peter Becker

This update is a summary of the work that has been completed in 2022 and 2023.  Much work has been done and the end of this restoration project is now in sight.

Interior work

Paint and varnish stripping is completed.  This labor intensive work required using heat to soften up to 4 layers of paint so it could be scraped off.  Additional scraping and sanding got down to clean wood.  The baggage section was painted a dark red color to match the original paint.  The color does leave the section dark looking with light only from one window and the small windows in the baggage doors.

In the passenger section walls were stripped and the walnut trim was reattached.  After filling many screw and nail holes and finish sanding the walls were stained.  A small section has been varnished to get an idea of the finished coloring of the walls.  The clerestory area was also stripped and painted white and the clerestory window were installed.

In other perhaps less noticed work the old and damaged Panasote ceiling was removed in preparation for the new ceiling.  The original ceiling/head liner was painted canvas tacked to roof ribs. We do not know the color or pattern of the original as we only have scraps of the fabric from around the edges but we hope the new ceiling will be in the style of the original.  Significant time was also spent repairing missing and rotten floor boards.

Reproduction of the seats is the last major project for the interior.  We have the cast iron seat parts which have now been painted and the wood seat frame parts are made and varnished.  The bottom and back cushions still need to be made and upholstered.

Exterior Work

Installation of the sound deafening ceiling attached to the underside of the car body was completed and the truss rods and brake parts were painted but the major exterior project was the roof work.  This work include replacing damaged structural parts, patching vent holes and replacing small portions of the roof deck.  Wood drip edge made many years ago was finally installed.  Prior to installation of the canvas roof covering, the roof deck was sanded and painted while keeping an eye out for any protruding nails or screws.  Canvas was stretched over the roof and tacked along the edges with thousands of tacks.  The canvas was saturated with a special formula canvas paint to make it impermeable to water.  The drip edge and other exposed wood was painted the green color that will be used on the rest of the car body.  Finally, new screens were installed to complete the roof.

A special thanks to any volunteers that have helped with the project in the last 2 years. Including (in no particular order) David M, David P, Larry S, Steve P, Jay S, Karl S, Jeff H, Nancy K, Owen H, Mike M, Tom B, Gregg W., Jane, Richard P, James B. Grant H. and probably someone I have forgotten.

All photos are by Peter Becker unless otherwise noted.

EJ&S #2 baggage section painted to match original color.
Freshly stained west wall of passenger section.
East wall stained with first coat of varnish.
Painted clerestory area with installed window.
Painted cast iron seat part including wall casting and seat back arms.
Seat mockup showing configuration of cast iron parts with old seat bottom and frame approximating the size of the back cushion.
Roof prior to canvas installation
Roof with canvas and screens installed. W. Buhrmaster photo.

Mid-Continent Railway Museum excited to announce $5,000 Grant from NRHS

Mid-Continent Railway Museum Posted on June 1, 2023 by RebeccaJune 1, 2023

Mid-Continent Railway Museum has been awarded a $5,000 grant from the National Railway Historical Society. This grant will be utilized for the reproduction of 16 seat bottoms and back cushions needed to complete the restoration of the East Jordan and Southern No. 2 combination car. This car is the oldest in our museum’s collection, and we are thrilled to be able to begin the last step of this car’s restoration journey.

#2 while in service. Date unknown. Location is alongside the EJ&S’s East Jordan depot. Date unknown; L.B. Herren photo; Ted Schnepf collection, from Paul Swanson.

About the East Jordan and Southern No. 2 Car

East Jordan and Southern No. 2 was originally built in Nov. 1864 as first-class coach No. 112 for the Grand Trunk Railroad of Canada and operated between Detroit and Port Huron. The coach was renumbered 585 and received a major rebuild in 1889 to update its appearance and give it new mechanical gear. After refurbishment by Hicks Locomotive and Car works the coach came to the EJ&S in April 1902. In 1919 it was rebuilt as a baggage coach combination car by the EJ&S. The combine remained in service until 1961 when the line was abandoned. East Jordan and Southern No. 2 was acquired by the museum in 1963 and it has been at Mid-Continent for the past 60 years.
EJ&S No. 2 is one of the oldest passenger cars surviving in the United States. While the exterior has been considerably altered by two significant rebuilds, the interior of the passenger section still has the character and woodwork of the 1864 car. The plan is to restore the interior to that of an 1860s car which will be unique among the collection at our museum. No seats were in the car when it arrived at the museum. We must reproduce seats typical of the time which have cast iron frame parts and cushions made with plush mohair upholstery.
Restorations on the EJ&S No. 2 has been progressing since its start in 2014. Work thus far has included replacement of the side sills. Along with the rebuilding of the “east side” wall structure, windows, baggage doors, steps, and end platforms. The siding has been replaced thanks in part to a 2015 grant from the NRHS, and as for the interior woodwork, it has been stripped and is waiting to be refinished.
The remaining work includes installing canvas roof covering, clerestory screens, as well as installation of the window, doors, blinds, and interior hardware. The last step is reproducing and installing the seats in the passenger section of the car, and with help from this grant, it can now move closer to being completed.

How to Help this Project Move Forward

Thanks to the NRHS, we have some additional help in finishing this project. However, the full cost of this project still exceeds the amount we’ve been given. In total, the full cost of the seats will be around $30,750. If you would like to help us reach this goal, please donate at the link below.

Donate to East Jordan & Southern #2 Project
(credit/debit card or PayPal account)
Donate to East Jordan & Southern #2 Project
(printable donation form)

About the National Railway Historical Society

The National Railway Historical Society is a non-profit organization that supports the preservation projects of trains, railways and stations with thousands of dollars awarded in Heritage Grants. This organization was founded in 1935 by rail historians and has since grown from a small group of 40 founding members. Today, they have over 13,000 members, who include men and women of all ages. Thus, making it the largest rail preservation and historical society.

About the Mid-Continent Railway Museum

Mid-Continent Railway Historical Society–also known as Mid-Continent Railway Museum–is an outdoor, living museum and operating railroad recreating the small town/short line way of life during the “Golden Age of Railroading,” with operating trains, educational exhibits, and displays of restored rolling stock. In 2023 Mid-Continent will be celebrating its 60th anniversary of sharing railroad history with museum visitors.

Posted in Car Shop General Updates, EJ&S #2, News

Post navigation

← Older posts
QUICK LINKS
PLAN YOUR VISIT
BUY TICKETS
DONATE
JOIN OUR EMAIL LIST
VIEW WEBCAMS

Contact Us

Mid-Continent Railway Museum
P.O. Box 358
E8948 Museum Road
North Freedom, WI 53951
Office Phone: 608-522-4261
or 800-930-1385
Office Hours: Tuesday-Sunday
9:30am-5:00pm
E-mail: inquiries@midcontinent.org

Recent News

  • Help Keep #1385’s Legacy On Track – Update
  • Dardanelle & Russellville #9 – March 21, 2026, Work Session Update
  • Help Keep #1385’s Legacy On Track!
  • Montana Western #31 and DULUTH Sleeper Car $10,000 Donation Challenges MATCHED
  • 2025 DULUTH Progress Report
©2026 - Mid-Continent Railway Museum - Weaver Xtreme Theme Privacy Policy
↑