The MCRM Restoration Department recently completed a three-day volunteer work session that was held on April 10th-12th. We had a good size crew given that it was held during the week. The volunteers that helped out for this session were Jack, Jerry F, Jerry M., Dean, Karl, Bob R., Richard P., Pete, Larry S., Owen, Tom B., Steve and Bill B. Thanks to this crew we got a lot of work performed and completed.
Following is a brief summary of the progress made during the session:
LS&I #64:
Work continued on cutting and fitting new wood for the exterior of the car. Karl trimmed up the new center window stops and installed them on the car. Bob R. primed all of the new battens for the windows. Jack and Jerry were working on cutting, fitting and installing new windowsills. Two windowsills remain to be cut and fit. They also installed one set of the new battens for the arched windows and sash. During the next session, work will continue on the windowsills and installing more of the window battens.
Bob priming the new battens.Karl installing the center window stops.Jack sanding the battens.Jerry F. fitting one of the curved battens.
One window with all of the trim installed.
C&IM #90:
Jerry and Dean continued to install trim pieces and mahogany plywood in the north stateroom. The woodwork in the clerestory area is complete as well as the north and south walls in the north stateroom. Once additional mahogany plywood is purchased the east and west wall will be worked on. In the south stateroom, Steve roughed in the new wiring for the lighting and outlets for the room.
Jerry M and Dean installing trim pieces in the C&IM 90 south state room.
EJ&S #2:
Work continued in the passenger section of the car. Larry S. sanded the recently varnished woodwork while Owen worked on painting pieces of the clerestory trim (two colors). Owen and Bob teamed up to apply two coats of varnish on pieces of walnut trim during the session. Pete and Larry worked on cutting and planning pieces of poplar that will be used for making the seat back frames for the car. Plans call for moving the EJ&S #2 to the north end of the car shop so the car can be accessed easier for painting the exterior of the car. This move is scheduled to take place on April 20th.
Owen painting the trim pieces.Bob varnishing the walnut trim pieces.
DULUTH:
Karl and Bill B worked in the DULUTH smoking room. They cut new headliner panels for the east and west sides as the old pieces were water damaged. Karl also started to remove the remnants of the partition that was embedded in the west wall where the swinging door was mounted.
Karl working in the DULUTH smoking room.
C&NW #1099:
Richard continued working on restoring and rebuilding the underframe of the narrow gauge combine. His work this year includes installing two new side sills, two new end body beams, two new body bolsters, one new intermediate sill and an all-new subfloor. During the session Richard and Larry S. worked on squaring up the frame in preparation to securing the flooring and side walls to the frame.
The latest progress on the #1099.
MISCELLANEOUS:
Bob installed the new springs on the National vestibule traps on the north end of the Badger #2 Fish car. The springs are part of a system that help lift the traps up, when opening, as well as prevents the traps from free falling when closing.
Larry T. is continuing to strip the old finish off the woodwork inside the GN A-22 “Hill” car. Larry is presently working in the state room and has also been working in the garage end of the car. He has been making good progress and he has been uncovering some beautiful mahogany along the way.
Newly installed spring on the Fish car trap.
Work progressing inside the garage end of the A-22 “Hill” car.
Upcoming work sessions include one on April 26, 27 and May 3, 4 and 5. The May 3-5 session is in conjunction with the “Spring Fling” event on May 4th. We’d really like to have a good turnout for the Spring Fling weekend as we have a number of projects that we need help with. You can register for the Spring Fling here: https://form.jotform.com/240655916920157
If you would like to help out in our restoration department, please reach out to the Mid-Continent office at 608-522-4261 or email inquiries@midcontinent.org.
Mid-Continent’s Restoration Department has released its 2024 work session schedule. These work sessions are a great way to get involved at Mid-Continent Railway Museum.
Our doors are open to anyone willing to give us a hand and help us with the restoration work. Give us a hand for a day or several days throughout the summer. Every bit of help makes a difference and is appreciated. We have a wide range of needs (i.e. painting, cleaning, stripping, wood work, roofing, refinishing, upholstery, metal work, and more) and everyone can be a help.
If you’re interested in volunteering, please reach out! To be placed in contact with Bill Buhrmaster, MCRM’s Restoration Manager, send call the museum office at 608-522-4261.
Session #
Dates
February TBD (Set by emails)
March TBD (Set by emails)
1
March 2-3
2
April 10-11-12
3
April 26-27
4
May 3-4-5 Spring Fling (Museum-wide Volunteering Day): May 4
5
May 17-18-19
6
June 8-9-10
7
June 26-27-28-29-30 2024 All Hands on Deck
8
July 13-14-15
9
July 26-27-28
10
August 10-11-12
11
August 23-24-25
12
September 13-14-15
13
September 27-28-29-30 Vintage Rail Car Tours: September 28-29
14
October 11-12-13 Autumn Color Weekends: October 5-6 & October 12-13
15
October 25-26-27
16
November 15-16-17
17
November 29-30 & December 1 Santa Express: November 30 – December 1 & December 7-8
The Mid-Continent Railway Museum Restoration Department recently completed a three-day volunteer work session that was held on August 25th through the 27th. We had a good turnout as we had (21) volunteers helping us over the three-day session. The next planned Restoration Department volunteer work session is scheduled for September 8, 9 and 10. Plan on joining us and giving us a hand. We’re continuing to make some great progress and we would welcome your help.
Also mark your calendar to attend the upcoming MCRM Vintage Rail Car Tours scheduled for September 30th and October 1st. We’ve got a great lineup of cars on the tour this year as well as tours through the Restoration Shop. More information about the tours is available by clicking on the following link:
The MCRM Restoration Department recently completed a three day volunteer work session that was held on August 25th through the 27th. We had a good turnout for the three day session and we averaged over (13) volunteers per day on restoration projects. The (21) volunteers that helped out for this session were Jack, Jerry F, Mike M., David P., Karl, Jeff Ha., Richard P., Peter B., David M., Jerry M., Steve W., Judy G., Darryl G., Gregg, Jane, Peter S., Ben, Sam, John T, Bob R. and myself. Thanks to this great crew we got a lot of work performed and completed.
Following is a brief summary of the progress made during the session:
LS&I #64:
-Jack delivered four of the recently completed seat back frames that he made in his shop. -Jack and Jerry cut and fit more of the arched window trim pieces (pork chops) on the east side. -Mike M. installed the screws in the trim pieces. -Larry continued to fill and sand the ends of the car and the roof overhangs. To date over 90% of the exterior epoxy repairs have been completed. -Judy painted the back sides of the pork chops and the balance of the car siding.
Larry performing epoxy repair on the end of the LS&I #64.The newly cut and fit trim pieces above the arched windows.Mike installing screws in the new fit trim pieces on the LS&I #64.
The LS&I #64 is coming along and looking better all of the time.
DSS&A DULUTH:
-Karl scraped, filled and sanded the shade boxes for the sleeping compartment windows. -I stained and sealed wood work on the east and west walls in the sleeping compartment -Karl and I made an exploratory cut into the upper ceiling panel in the sleeping compartment. -Karl installed the screws in window post trim pieces, shade box lower rails and the shade bearing blocks. -Mike continued to take dimensions to finalize the drawings for the four interior doors that need to be replicated. -Judy performed the final sanding on the shade boxes and the wooden dowels for the berth coat hangers -Richard continued to remove more of the old material, nails and flashing off of the roof.
Karl installing parts in the DULUTH.Work progressing on Berth #7 in the DULUTH.
EJ&S #2 combine:
-Pete continued to work on the canvas roof replacement project. -Pete installed a few of the clerestory windows and he applied a fourth and final coat of canvas paint. -Gregg and Jane assisted Pete by installing some of the clerestory screen blocks that get mounted on the exterior of the clerestory area.
A pair of the newly installed clerestory windows in the EJ&S #2.The canvas roof on the EJ&S #2, prior to final coat of paint.
Chicago and Illinois Midland #90:
-Jerry M. and Dean continued working in the observation room -They completed installing all of the mahogany plywood in the room -They installed the new window stop for the observation room end window -They cut, fit and installed the window post column trim pieces -With the above work completed the woodwork in the observation room is done and they are now moving onto the state room that is adjacent to the observation room. -Steve W. continued to work on the electrical scope for the car. This included cleaning out the old wires in the electrical closet and creating a space for the wires to be routed through the dining room.
Jerry and Dean working inside the C&IM #90 observation room.A view of the completed east wall in the C&IM #90.
Copper Range #29:
– Darryl painted (cab green) the interior of the new cab windows (engineer’s side) and installed the glass in the two new window frames -Darryl applied a final coat of black on the exterior side of the window frames. -Darryl installed the completed windows in the cab. -This is a nice project to get completed as the locomotive is on display and very visible to the public.
The new windows installed in the CRR #29.Darryl working on one of the new windows for the CRR #29.
C&NW #613:
-David P. scraped and sanded the lower siding on the west side of the car -John T and David P. painted the lower siding on the west side. -John T. sanded and painted the two ends and scraped the east side (in process)
John scraping paint on the east side of the C&NW #613.The west side of the C&NW #613 in fresh paint.
Various:
-Jeff Ha. sanded and applied the second coat of varnish to the two toilet rooms in the Great Northern #3261 coach -David M started to needle scale the trucks for the Cazenovia Southern combine. -Bob and Richard installed the platform trap hardware on the observation end steps of the Badger #2. -Richard, Peter S, Ben and Sam helped with the following:
1. Removed the stored steam heat and air brake parts from the Car Shop and moved them to the Storage Building #1. 2. Moved the wooden work platforms and composite wood material to Storage Building #2 3. Disassembled and removed the large metal shelving from the west wall of the Car Shop. 4. Made a trash run to empty all of the Car Shop trash containers that Jeff Ha. moved to the north entrance door. 5.The steam heat pipes and scaffolding that were stored on the west side of the #613 car were moved and placed on the east side of the car. This was done to clean up the area around the car that the public sees.
Jeff Ha. varnishing inside the GN #3261 toilet room.The newly fabricated and install trap mechanism (minus the spring) on the Badger #2 fish car.Peter, Sam and Ben after a hard day of work.David M. needle scaling one of the trucks for the Cazenovia Southern combine.
Goodman Lumber Co. #9 Shay:
Work is progressing on installing the new jacketing on the boiler. The jacket pieces were in the process of being fitted and trimmed. By the end of the weekend all of the jacketing is in place and fastened together. Next up is to have the jacketing bands made and installed. Painting of the entire Shay will follow once all of the jacketing work is completed. This work is made possible thanks to donations from numerous donors and a matching donation by Bobbie Wagner.
That’s the latest. Thank you to all of the volunteers for your time and hard work. It is greatly appreciated!!! The next planned Restoration Department volunteer work session is scheduled for September 8, 9 and 10. Plan on joining us and giving us a hand. We’re continuing to make some great progress and we would welcome your help.
Also mark your calendar to attend the upcoming MCRM Vintage Rail Car Tours scheduled for September 30th and October 1st. We’ve got a great lineup of cars on the tour this year as well as tours through the Restoration Shop. More information about the tours is available by clicking on the following link:
Mid-Continent Railway Museum has been awarded a $5,000 grant from the National Railway Historical Society. This grant will be utilized for the reproduction of 16 seat bottoms and back cushions needed to complete the restoration of the East Jordan and Southern No. 2 combination car. This car is the oldest in our museum’s collection, and we are thrilled to be able to begin the last step of this car’s restoration journey.
#2 while in service. Date unknown. Location is alongside the EJ&S’s East Jordan depot. Date unknown; L.B. Herren photo; Ted Schnepf collection, from Paul Swanson.
About the East Jordan and Southern No. 2 Car
East Jordan and Southern No. 2 was originally built in Nov. 1864 as first-class coach No. 112 for the Grand Trunk Railroad of Canada and operated between Detroit and Port Huron. The coach was renumbered 585 and received a major rebuild in 1889 to update its appearance and give it new mechanical gear. After refurbishment by Hicks Locomotive and Car works the coach came to the EJ&S in April 1902. In 1919 it was rebuilt as a baggage coach combination car by the EJ&S. The combine remained in service until 1961 when the line was abandoned. East Jordan and Southern No. 2 was acquired by the museum in 1963 and it has been at Mid-Continent for the past 60 years. EJ&S No. 2 is one of the oldest passenger cars surviving in the United States. While the exterior has been considerably altered by two significant rebuilds, the interior of the passenger section still has the character and woodwork of the 1864 car. The plan is to restore the interior to that of an 1860s car which will be unique among the collection at our museum. No seats were in the car when it arrived at the museum. We must reproduce seats typical of the time which have cast iron frame parts and cushions made with plush mohair upholstery. Restorations on the EJ&S No. 2 has been progressing since its start in 2014. Work thus far has included replacement of the side sills. Along with the rebuilding of the “east side” wall structure, windows, baggage doors, steps, and end platforms. The siding has been replaced thanks in part to a 2015 grant from the NRHS, and as for the interior woodwork, it has been stripped and is waiting to be refinished. The remaining work includes installing canvas roof covering, clerestory screens, as well as installation of the window, doors, blinds, and interior hardware. The last step is reproducing and installing the seats in the passenger section of the car, and with help from this grant, it can now move closer to being completed.
How to Help this Project Move Forward
Thanks to the NRHS, we have some additional help in finishing this project. However, the full cost of this project still exceeds the amount we’ve been given. In total, the full cost of the seats will be around $30,750. If you would like to help us reach this goal, please donate at the link below.
The National Railway Historical Society is a non-profit organization that supports the preservation projects of trains, railways and stations with thousands of dollars awarded in Heritage Grants. This organization was founded in 1935 by rail historians and has since grown from a small group of 40 founding members. Today, they have over 13,000 members, who include men and women of all ages. Thus, making it the largest rail preservation and historical society.
About the Mid-Continent Railway Museum
Mid-Continent Railway Historical Society–also known as Mid-Continent Railway Museum–is an outdoor, living museum and operating railroad recreating the small town/short line way of life during the “Golden Age of Railroading,” with operating trains, educational exhibits, and displays of restored rolling stock. In 2023 Mid-Continent will be celebrating its 60th anniversary of sharing railroad history with museum visitors.
Mid-Continent Railway MuseumPosted on by Jeffrey Lentz
Mid-Continent’s Restoration Department has released its 2023 work session schedule. These work sessions are a great way to get involved at Mid-Continent Railway Museum.
Our doors are open to anyone willing to give us a hand and help us with the restoration work. Give us a hand for a day or several days throughout the summer. Every bit of help makes a difference and is appreciated. We have a wide range of needs (i.e. painting, cleaning, stripping, wood work, roofing, refinishing, upholstery, metal work, and more) and everyone can be a help.
If you’re interested in volunteering please reach out! To be placed in contact with Bill Buhrmaster, MCRM’s Restoration Manager, send call the museum office at 608-522-4261.
Session No.
Dates
1
February 24-25-26-27
2
March 9-10-11
3
March 24-25-26
Extra
NEWLY ADDED DATES!!! April 4-5-6
4
April 14-15-16 REVISED DATES!!! April 21-22-23
5
April 28-29-30
6
May 10-11-12 REVISED DATES!!! May 5-6-7 May 6th is the museum-wide SPRING FLING volunteering day
7
May 26-27-28 Volunteer Open House May 27th
Extra
NEWLY ADDED DATE!!! June 6th
8
June 10-11-12 REVISED DATES!!! June 9th and 10th
Extra
NEWLY ADDED DATE!!! June 17th
9
June 21-22-23-24-25
10
July 7-8-9
11
July 22-23-24
12
August 4-5-6
13
August 25-26-27
14
September 8-9-10
15
Sept 29-30, Oct 1-2 Vintage Rail Car Tours Sept 30-Oct 1
Contains information related to marketing campaigns of the user. These are shared with Google AdWords / Google Ads when the Google Ads and Google Analytics accounts are linked together.
90 days
__utma
ID used to identify users and sessions
2 years after last activity
__utmt
Used to monitor number of Google Analytics server requests
10 minutes
__utmb
Used to distinguish new sessions and visits. This cookie is set when the GA.js javascript library is loaded and there is no existing __utmb cookie. The cookie is updated every time data is sent to the Google Analytics server.
30 minutes after last activity
__utmc
Used only with old Urchin versions of Google Analytics and not with GA.js. Was used to distinguish between new sessions and visits at the end of a session.
End of session (browser)
__utmz
Contains information about the traffic source or campaign that directed user to the website. The cookie is set when the GA.js javascript is loaded and updated when data is sent to the Google Anaytics server
6 months after last activity
__utmv
Contains custom information set by the web developer via the _setCustomVar method in Google Analytics. This cookie is updated every time new data is sent to the Google Analytics server.
2 years after last activity
__utmx
Used to determine whether a user is included in an A / B or Multivariate test.
18 months
_ga
ID used to identify users
2 years
_gali
Used by Google Analytics to determine which links on a page are being clicked
30 seconds
_ga_
ID used to identify users
2 years
_gid
ID used to identify users for 24 hours after last activity
24 hours
_gat
Used to monitor number of Google Analytics server requests when using Google Tag Manager